OMVSP - A MultiVariate Statistical Package.                                     O                                                                               O  MVSP is a menu-driven, easy to use program for analyzing data using          Omultivariate numerical techniques. The available procedures are principal      Ocomponents analysis, principal coordinates analysis, correspondence analysis,  Oand cluster analysis.  A number of similarity & distance measures and          Odiversity indices are also available                                           O                                                                               O  MENU CHOICES may be made by moving the reverse highlighted cursor to the     Oappropriate choice, using the up and down cursor keys (8 & 2 on the numeric    Okeypad), or by typing the letter preceding the menu choice.  Help may be       Oobtained by placing the cursor on the desired option and pressing the F1 key.  O                                                                               O  DATA FILES may be produced with the MVSP data editor or any word processor   Owhich creates ASCII files.  The rows of the data matrix are the variables and  Othe columns are the individual cases (objects or samples).                     O                                                                               O  ANALYSES are performed by choosing the appropriate menu selection and        Oentering the name of the data file.  A menu of options, with the default       Ochoices, is presented.  You may change any option to tailor the analysis to    Oyour needs.  Choosing 'RUN' then performs the analysis with those options.     O                                                                               O  OUTPUT may be sent to the printer, the screen only, or to a file for further Omanipulation or entry into a graphics program.  The file may be edited with a  Oword processor to put it in the proper format for this purpose.                O                                                                               OSave Defaults Help Screen                                                      O                                                                               O  This option allows you to save all current settings for user specified       Odefaults to the configuration file MVSP.CNF.  These defaults include those     Oin the configuration menus and those specified in the opening menus for each   Oanalytical procedure.                                                          O                                                                               O  This configuration file is read each time the program is run, and the defaultOsettings are reinstated.  The file MVSP.CNF should be in the same directory    Oas the program files MVSP.EXE and MVSP.HLP.  Alternatively, you may specify    Owhere these files are to be found using the DOS SET command:                   O  SET MVSP=x:\directory                                                        Oin which "x:" is the disk drive and "\directory" is the directory name.        OQuit Menu Help Screen                                                          O                                                                               O  This allows you to quit this menu and return to the previous menu.           O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OQuit Analysis Help Screen                                                      O                                                                               O  This option quits this menu and returns to the main menu, rather than        Ocontinuing on with the analysis.  You may then choose to run another analysis  Oor quit MVSP.                                                                  O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OPrinted Output Help Screen                                                     O                                                                               O  This option allows you to specify what results and other additional          Oinformation (such as raw data) should be output and where they should be sent  O(i.e. screen, printer, or a file).                                             O                                                                               O  Your choices of output options may be saved to the configuration file for    Ofor later recall.                                                              O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OTransform Data Help Screen                                                     O                                                                               O  You may choose to have your data transformed before analysis.  This option   Oallows you to choose square root, log (base 2, 10, or e) or logratio           Otransformation.                                                                O                                                                               O  The log transformations are performed on the values of (X + 1) to avoid      Ocomputer errors when the datum is 0, as the log of 0 is undefined, and to      Oavoid negative results when the datum is < 1.  The square root                 Otransformation is performed on the original datum.                             O                                                                               O  The centered logratio transformation replaces data with the log of the ratio Obetween the data value and the geometric mean of the sample.                   ORun Analysis Help Screen                                                       O                                                                               O  This initiates the running of the analysis, using the options chosen from    Othis menu.  If you are having the results output to files, you will be         Oprompted for filenames.                                                        O                                                                               O  As the analysis is running, you will see status messages telling you what    Owhat is currently begin done.                                                  O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OPrint Data Help Screen                                                         O                                                                               O  You may choose to have the data printed out so that you can check that they  Ohave been input correctly.                                                     O                                                                               O  The page format for this printout may be modified through the data output    Oformat section of the program defaults menu (type P O from the analysis menu). OYou may change the column width, page width, and decimal places.  A narrower   Ocolumn width will allow more data to be printed per page.                      O                                                                               O                                                                               O                                                                               O                                                                               OPrint Transformed Data Help Screen                                             O                                                                               O  You may choose to have the transformed data printed out so that you can see  Othe results of the log or square root transformation.                          O                                                                               O  The page format for this printout may be modified through the results output Oformat section of the program defaults menu (type P O from the analysis menu). OYou may change the column width, page width, and decimal places.  A narrower   Ocolumn width will allow more data to be printed per page.                      O                                                                               O                                                                               O                                                                               O                                                                               OOutput Destination Help Screen                                                 O                                                                               O  You may use this option to direct program results to a printer, file, or to  Othe screen.  All results will be sent to the chosen device, along with any of  Othe optional output chosen from this menu.                                     O                                                                               O  If you choose file or printer only, then only status messages will appear on Othe screen; otherwise the output will also scroll by on the screen.            O                                                                               O  If output is to be directed to a file, you will be prompted for a file name  Obefore the analysis begins.                                                    O                                                                               O                                                                               OTranspose Data Help Screen                                                     O                                                                               O  This option transposes the data matrix before analysis.  Normally, you would Ohave the data file set up with the objects of interest as the columns and the  Ocharacters or variables defining those objects as rows.  Thus, in an ecologicalOstudy, the samples would be columns and the taxa rows. In a taxonomic study,   Othe taxa would be columns and the characters rows.                             O                                                                               O  This option allows you to "flip" the data matrix so that the rows of the     Omatrix are considered the objects of interest.                                 O                                                                               O                                                                               O                                                                               OMinimum Eigenvalue Help Screen                                                 O                                                                               O  This option allows you to specify the minimum eigenvalue to report.  Any     Oeigenvalues (and their associated eigenvectors and scores) less than this valueOwill not be reported.                                                          O                                                                               O  You may enter a specific value for the minimum eigenvalue, or you may choose Oone of two rules for determining the most appropriate minimum eigenvalue.  HelpOscreens for the Minimum Eigenvalue menu explain these rules.                   O                                                                               O  You may also have all eigenvalues and vectors printed out (the same number   Oas the rows of the data matrix).                                               O                                                                               OAccuracy of Solution Help Screen                                               O                                                                               O  This value controls the accuracy of the eigenanalysis.  The form of          Oeigenanalysis used in MVSP makes repeated approximations of the solution,      Ostopping when the desired accuracy level is reached.  A lower value for desiredOaccuracy will give a more accurate solution, but will also cause the program toOrun longer.                                                                    O                                                                               O  The accuracy value is APPROXIMATELY equal to the number of significant digitsOof accuracy in the major eigenvalues and eigenvectors (those greater than %10  Oof the variance).  A value of 1.0E-6 (0.000001) should give a solution with at Oleast six significant digits of accuracy.                                      O                                                                               OChange Program Defaults Help Screen                                            O                                                                               O  This option allows you to change many of MVSP's default settings and save    Othese new defaults to a configuration file for later recall.  The following    Ooptions may be changed:                                                        O  Disk drive for temporary storage of work files                               O  Default data file pathname and data filename extensions                      O  Printed output format: page width, column width, and number of decimal placesO  Type of printer to use for text and graphics                                 O  Screen colors and screen output method (fast or slow)                        O  Form of graphic output                                                       ODefaults saved to the configuration file will be automatically reinstated      Oevery time MVSP is run.                                                        OGraph Results Help Screen                                                      O                                                                               O  You may choose to have scatter diagrams of the ordination scores and         Odendrograms drawn on the screen and printer.  The graph can be drawn in        Ographics mode or character mode. You can choose which to use through the OutputOFormat menu in the Program Defaults menu (option P of main and analysis menus) O                                                                               O  Graphics mode plots may be printed by pressing "P" when the graph is         Odisplayed on the screen.  You may also use choose the "Print Graph             OAutomatically" option of the "Graphics Options" menu to have the graphs sent   Odirectly to your printer without any intervention.                             O                                                                               O                                                                               OMatrix Input Help Screen                                                       O                                                                               O  This option allows you to choose the format for the input matrix.  You may   Ohave only the lower or upper half of the symmetrical matrix output, with or    Owithout the diagonal, or the full matrix.                                      O                                                                               O          1                0.2 0.3 0.4          1  0.2 0.3 0.4                 O         0.2  1                0.1 0.2         0.2  1  0.1 0.2                 O         0.3 0.1  1                0.8         0.3 0.1  1  0.8                 O         0.4 0.2 0.8  1                        0.4 0.2 0.8  1                  O                                                                               O           Lower half        Upper half          Full matrix                   O         with diagonal      no diagonal                                        OPrincipal Components Analysis Help Screen                                      O                                                                               O  Performs a R-mode principal components analysis of the input data, with a    Ovariety of options, including centered or non-centered data, covariance or     Ocorrelation matrix, raw or transformed (log or square root) data.              O                                                                               O  In this analysis, the rows of the data matrix are the variables.  Component  Oloadings are provided for each row, indicating the 'influence' of that variableOon that PCA axis.  Component scores are then provided for each column, the     Oobjects of interest.  These scores are the elements which are usually plotted, Oalthough the loadings may also be plotted.                                     O                                                                               O                                                                               OPrincipal Coordinates Analysis Help Screen                                     O                                                                               O  Performs a Q-mode principal coordinates analysis.  The input data are in the Oform of a symmetrical distance matrix.  The distance measure must be metric,   Oand any of the measures on the "Distances" menu of the Distances & SimilaritiesOprocedure of MVSP are suitable, with the exception of the Squared Euclidean    ODistance.  Among the similarity measures, Gower's may be used.                 O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OCorrespondence Analysis Help Screen                                            O                                                                               O  Performs a correspondence analysis (or reciprocal averaging) of the input    Odata, with a variety of options, including detrending by segments, weighting   Oof scores and raw or transformed (log or square root) data.                    O                                                                               O  In this analysis, the rows of the data matrix are the variables.  CA scores  Oare provided for both rows and columns;  these are plotted separately here but Othey may also both be plotted on the same graph.                               O                                                                               O                                                                               O                                                                               O                                                                               OSimilarities and Distances Help Screen                                         O                                                                               O  Calculates a variety of similarity and distance measures.  The resulting     Osymmetric matrix may be output to a separate matrix file which can then be readOby the cluster or principal coordinates analysis procedures or transferred to  Oother programs.                                                                O                                                                               O  The measures are calculated in a pairwise fashion between the columns of the Oraw data matrix.  The data may be transposed before calculation so that the    Omeasures are between the rows of the original data matrix instead.             O                                                                               O                                                                               O                                                                               OCluster Analysis Help Screen                                                   O                                                                               O  Performs cluster analysis of a matrix of similarity or distance measures.    OThis matrix must first be calculated by the Distances & Similarities procedure.O                                                                               OThe input file must be a symmetric matrix, and may be a lower half matrix,     Oupper half matrix, or full matrix.  The diagonal may be present or absent in   Othe half matrices.                                                             O                                                                               O  Seven clustering procedures are available, including minimum variance        Oclustering, which is limited to using squared Euclidean distances, which are   Ocalculated by the similarity/distance procedure.                               O                                                                               ODiversity Indices Help Screen                                                  O                                                                               O  Calculates diversity indices for each column (sample) of the data matrix.    O                                                                               O  Three diversity measure are available: Shannon, Simpson, and Brillouin.      OEvenness is also calculated by dividing the diversity index by the log of the  Ospecies count.  You are given a choice of the log base to use in the analysis. OThe number of species per sample is also given.                                O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OData Manipulation Help Screen                                                  O                                                                               O  This procedure allows for the creation and manipulation of data files.  You  Omay use the MVSP data editor to enter and edit the data matrix.  There are alsoOoptions available which allow you to log or square-root transform the data,    Otranspose the data matrix, convert the data to percentages or the octave       Oabundance scale, and to drop rows or columns.                                  O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OImport/Export Help Screen                                                      O                                                                               O  This option allows you to read data into MVSP from other programs as well    Oas create files in other formats.  The formats supported are CEP (Cornell      OEcology Program format used in Twinspan, Decorana, and Canoco), and WKS, WK1,  Oand WK2 (Lotus 1-2-3 spreadsheets, ver. 1 and 2 and Symphony ver. 1),          O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OQuit MVSP Help Screen                                                          O                                                                               O  Ends current MVSP session and returns to the DOS prompt.                     O                                                                               O  If you have made any changes to the program options which you wish to save   Ofor use in future session, this must be done before you exit.  Changes may be  Osaved to the configuration file MVSP.CNF by choosing the "Save defaults"       Ooption in the Program Defaults menu (option P in main menu) or in the opening  Omenu for each statistical procedure.                                           O                                                                               O  Thank you for using MVSP!                                                    O                                                                               O                                                                               OChange Drive or Subdirectory Help Screen                                       O                                                                               O  This option allows you to specify the disk drive and directory in which your Odata files will reside.  When prompted, you may enter either a disk drive      Odesignation (i.e. "B:") or a valid DOS pathname (i.e. "C:\MVSP\DATA").  The    Oprogram will then look in that directory or disk for the data files and will   Owrite all output files there.  This default may be overridden by entering the  Ofull pathname of a file when the program requests a filename.                  O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OCenter Data Help Screen                                                        O                                                                               O  You may choose to have the data centered around the origin before the        Osimilarity matrix is calculated, or to leave the data uncentered.  Generally,  Othe data are centered unless there is a specific reason for not centering.     O                                                                               O  An uncentered PCA can be useful when the objects being analyzed fall into    Otwo or more distinct groups, with little overlap.  When such data are analyzed Owith the uncentered option chosen, these distinct groups will be associated    Owith different axes.                                                           O                                                                               O                                                                               O                                                                               OStandardize Data Help Screen                                                   O                                                                               O  You may choose to have the data either standardized by rows, thus forming a  Ocorrelation matrix, or not standardized, forming a covariance matrix.          O                                                                               O  Standardization is desirable to reduce the effects of dominant species or    Oto standardize different units of measurement.  Otherwise, the covariance      Omatrix should be used.                                                         O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OPrint Similarity Matrix Help Screen                                            O                                                                               O  You may choose to have the covariance or correlation matrix printed out      Obefore the eigenanalysis is performed.  This is printed as a full matrix with  Othe diagonal present.                                                          O                                                                               O  The page format for this printout may be modified through the output format  Osection of the program defaults menu (type P O from the analysis menu).  You   Omay change the column width, page width, and decimal places.  A narrower columnOwidth will allow more data to be printed per page.                             O                                                                               O                                                                               O                                                                               OPrint Sorted Data Help Screen                                                  O                                                                               O  This option will cause the raw data to be printed out sorted by the first    Oaxes of the ordination.  If the first axis accounts for much of the variance   Oin the data, the sorted data matrix will clearly show the patterns.            O                                                                               O  This output is most effective when the data matrix is all in one, or a few,  Oblocks.  If you have a wide carriage printer or a dot matrix printer capable   Oof printing in compressed mode, set MVSP to print out pages 130 columns wide   Oand to use columns as narrow as possible.  If you have 25 or fewer columns     Oin your data matrix, a column width of 5 and a 130 column page will allow the  Owhole data matrix to be printed in one block.  These width options can be      Ochanged through the Program Defaults menu (option P on main or analysis menu)  OWeighting Strategy Help Screen                                                 O                                                                               O  You may choose to have the scores weighted in a variety of ways, based on theOformulae of Orloci (1978).  Rare or common species may be upweighted by        Omultiplying the original score by either the ratio of the total abundance for  Oeach species and the total abundance of all species or vice versa.             OAlternatively, the scores may be adjusted to a percent scale, so that the      Ovalues for each axis range from 0 to 100.                                      O                                                                               O  If the reciprocal averaging algorithm is being used then weighting is done   Oin a different way.  You may choose to have the rare species downweighted      Obefore the analysis to remove the problems of unusual taxa dominating the      Oanalysis.                                                                      OAlgorithm Help Screen                                                          O                                                                               O  Correspondence analysis can be calculated in two different ways.  It can be  Odone using a cyclic Jacobi algorithm, similar to PCA, or it may be done in a   Oreciprocal averaging manner.  The Jacobi method gives the complete solution    O(one axis for every variable) but is slow and detrending can not be performed. OThe reciprocal averaging technique allows for detrending and is faster, but    Owill only give the first four axes.  It is also more liable to inaccuracies    Oif two or more axes have very similar eigenvalues.                             O                                                                               O                                                                               O                                                                               O                                                                               ODetrending Help Screen                                                         O                                                                               O  Most ordination methods, including CA, are affected by the 'arch or horse-   Oshoe effect', in which the points along a gradient form a curved pattern       Oon the scatterplots rather than a straight line.  This is a result of a        Omathematical distortion as the data are reduced in dimension.                  O                                                                               O  This arch can be removed using the detrending option.  This splits the axis  Ointo segments and adjusts the scores so each segment has the same mean value.  OIt also rescales the axis so that points at the ends are not closer together   Othan in the center.  Detrending can make the results more interpretable, but   Omay also obscure some real trends and may further distort the results.  Always Orun analyses both with and without detrending and compare the results.         OSegments for Detrending Help Screen                                            O                                                                               O  Detrending is accomplished by dividing the first axis into several segments  Oand adjusting the scores on the second axis so that the mean score for each    Osegment is the same.  The default value is 26 segments.  This should only      Obe changed if it appears that the detrending is not being performed            Oeffectively and there is still some hint of an arch.  In this case the number  Oof segments can be increased.                                                  O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               ORescaling Cycles Help Screen                                                   O                                                                               O  A side effect of the arch effect is that the points at the ends of the       Oaxes are often closer together than those in the middle.  The scores can be    Oadjusted using a rescaling process so that they are more evenly spread.        O                                                                               O  The scaling process must be repeated several times to be effective.  You may Ochoose the number of times that this is done, although it is usually not       Orecommended that the value be changed from 4, as the solution can degrade if   Othe rescaling is done more times.                                              O                                                                               O  You may set this option to 0 if you do not wish rescaling to be done.        O                                                                               OMatrix Output Help Screen                                                      O                                                                               O  This option allows you to choose the format for the output matrix.  You may  Ohave only the lower or upper half of the symmetrical matrix output, with or    Owithout the diagonal, or the full matrix.                                      O                                                                               O          1                0.2 0.3 0.4          1  0.2 0.3 0.4                 O         0.2  1                0.1 0.2         0.2  1  0.1 0.2                 O         0.3 0.1  1                0.8         0.3 0.1  1  0.8                 O         0.4 0.2 0.8  1                        0.4 0.2 0.8  1                  O                                                                               O           Lower half        Upper half          Full matrix                   O         with diagonal      no diagonal                                        OCoefficient Help Screen                                                        O                                                                               O  You may choose one of a variety of distances or similarity coefficients to   Ocalculate for these data.  Eighteen coefficients are available on two menus.   OThe first menu contains distance measures and the second contains similarity   Omeasures (both quantitative and binary).                                       O                                                                               O  These coefficients are calculated in a pair-wise fashion between the columns Oof the data matrix.                                                            O                                                                               O  The help screens for the coefficient menus present the mathematical formulae Ofor each coefficient.  In these formulae, i and j represent the columns of the Odata matrix, while k represents the rows.                                      OPrint Results Matrix Help Screen                                               O                                                                               O  You may have the resulting distance or similarity matrix printed out to the  Oprinter or a file by setting this option to YES.  If this is set to NO, then   Othe results matrix will only be sent to the output matrix file, for input to   Othe clustering or PCO procedures.                                              O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OEuclidean Distance:                                                            O                                                                               O          ┌  ┌        ┐2┐½                                                     O   Ed   = │Σ │x  - x  │ │                                                      O     ij   └ k└ ik   jk┘ ┘                                                      O                                                                               O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OSquared Euclidean Distance:                                                    O                                                                               O            ┌        ┐2                                                        O  SEd   = Σ │x  - x  │                                                         O     ij    k└ ik   jk┘                                                         O                                                                               O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OStandardized Euclidean Distance:                                               O                                                                               O          ┌  ┌          ┐2┐½                                                   O          │  │ x  - x   │ │                                                    O StEd   = │Σ │  ik   jk │ │                                                    O     ij   │ k│ ──────── │ │                                                    O          │  │   sd     │ │                                                    O          └  └     k    ┘ ┘                                                    O                                                                               O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O        sd   = standard deviation of all the elements of k                     O          k                                                                    OCosine Theta (Normalized Euclidean) Distance:                                  O                                                                               O          ┌  ┌           ┐2┐½                                                  O          │  │ x     x   │ │                                                   O  CTd   = │Σ │  ik   jk  │ │                                                   O     ij   │ k│ ___ - ___ │ │                                                   O          │  │ ss    ss  │ │                                                   O          └  └   i     j ┘ ┘                                                   O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O               ┌  ┌   ┐2┐½                                                     O        ss   = │Σ │x  │ │                                                      O          .    └ k└ .k┘ ┘                                                      OManhattan Metric Distance:                                                     O                                                                               O            │        │                                                         O  MMd   = Σ │x  - x  │                                                         O     ij    k│ ik   jk│                                                         O                                                                               O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OCanberra Metric Distance:                                                      O                                                                               O            ┌            ┐                                                     O            │ │x  - x  │ │                                                     O            │ │ ik   jk│ │                                                     O  CMd   = Σ │ ────────── │                                                     O     ij    k│  x  + x    │                                                     O            └   ik   jk  ┘                                                     O                                                                               O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O                                                                               O                                                                               OChord Distance:                                                                O                                                                               O          ┌  ┌ ½    ½ ┐2┐½                                                     O   Cd   = │Σ │x  - x  │ │                                                      O     ij   └ k└ ik   jk┘ ┘                                                      O                                                                               O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OChi-Square Distance:                                                           O                                                                               O          ┌  ┌┌          ┐2┐┐½                                                 O          │  ││ x  - x   │ ││                                                  O  CSd   = │Σ │└  ik   jk ┘ ││                                                  O     ij   │ k│ ──────────  ││                                                  O          │  │   Σ  x      ││                                                  O          └  └    l  lk    ┘┘                                                  O                                                                               O  where: x   = value of the kth element of the ith, jth or lth variable        O          .k                                                                   O                                                                               O                                                                               OAverage Distance:                                                              O                                                                               O          ┌  ┌        ┐2┐½                                                     O   Ad   = │Σ │x  - x  │ │                                                      O     ij   │ k└ ik   jk┘ │                                                      O          │─────────────│                                                      O          │      n      │                                                      O          └             ┘                                                      O                                                                               O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O                                                                               O         n = number of elements in each variable                               OMean Character Difference Distance:                                            O                                                                               O            │        │                                                         O  MCd   = Σ │x  - x  │                                                         O     ij    k│ ik   jk│                                                         O          ────────────                                                         O               n                                                               O                                                                               O                                                                               O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O                                                                               O         n = number of elements in each variable                               OMore Coefficients Help Screen                                                  O                                                                               O  This option will take you to a second menu of coefficients containing        Oa number of similarity coefficients.                                           O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OPearson Product Moment Correlation Coefficient:                                O               ┌┌     _ ┐   ┌     _ ┐┐                                         O            Σ  ││x  - x │ - │x  - x ││                                         O             k └└ ik   i┘   └ jk   j┘┘                                         O  Pcc   =  ────────────────────────────────                                    O     ij    ┌  ┌     _ ┐2┐½  ┌  ┌     _ ┐2┐½                                    O           │Σ │x  - x │ │   │Σ │x  - x │ │                                     O           └ k└ ik   i┘ ┘   └ k└ jk   j┘ ┘                                     O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O         _                                                                     O         x   = mean value of the ith or jth variable                           O          .                                                                    OSpearman Rank Order Correlation Coefficient:                                   O                  ┌           ┐2                                               O               6Σ │ r   - r   │                                                O                 k└  ik    jk ┘                                                O  Scc   = 1 - ───────────────────                                              O     ij                3                                                       O                    (n)  - n                                                   O                                                                               O  where: r   = rank order of kth element in the ith or jth variable            O          .k                                                                   O                                                                               O         n   = number of elements in each variable                             O                                                                               OPercent Similarity Coefficient:                                                O                         ┌         ┐                                           O                   Σ  min│x  , x   │                                           O                    k    └ ik   jk ┘                                           O   Cc    =  200  ───────────────────                                           O     ij                ┌          ┐                                            O                    Σ  │x   + x   │                                            O                     k └ ik    jk ┘                                            O                                                                               O  where: x   = value of the kth element of the ith or jth variable             O          .k                                                                   O         min = minimum of two values                                           O                                                                               OGower General Similarity Coefficient:                                          O            ┌           ┐                                                      O   GGSc   = │Σ  w   s   │ ÷ Σ  w                                               O       ij   └ k  ijk ijk┘    k  ijk                                            O                   ┌                      ┐                                    O   where: s    = 1-│ │x  - x  │ ÷ range(k)│ for quantitative data;             O           ijk     │ │ ik   jk│           │                                    O                   └                      ┘                                    O               = 1 for matches of binary or multistate data, otherwise = 0     O          w    = 0 for negative matches of binary data, otherwise = 1          O           ijk                                                                 OData types are declared by the first two characters of the data labels:        O "B_" for binary, "M_" for multistate, anything else for quantitative          OSorensen's Coefficient:                                                        O                                                                               O              2a                                                               O  Sc   =  ──────────                                                           O    ij    2a + b + c                                                           O                                                                               O  where: a,b,c   = frequency of matches or mis-matches in variables i and j:   O                                                                               O                      Var.j                                                    O                    Pres. Abse.                                                O                   ┌───────────                                                O       Var.i  Pres.│  a     b                                                  O              Abse.│  c     d                                                  OJaccard's Coefficient:                                                         O                                                                               O              a                                                                O  Jc   =  ─────────                                                            O    ij    a + b + c                                                            O                                                                               O  where: a,b,c   = frequency of matches or mis-matches in variables i and j:   O                                                                               O                      Var.j                                                    O                    Pres. Abse.                                                O                   ┌───────────                                                O       Var.i  Pres.│  a     b                                                  O              Abse.│  c     d                                                  OSimple Matching Coefficient:                                                   O                                                                               O              a + d                                                            O SMc   =  ─────────────                                                        O    ij    a + b + c + d                                                        O                                                                               O  where: a,b,c,d = frequency of matches or mis-matches in variables i and j:   O                                                                               O                      Var.j                                                    O                    Pres. Abse.                                                O                   ┌───────────                                                O       Var.i  Pres.│  a     b                                                  O              Abse.│  c     d                                                  OYule Coefficient:                                                              O                                                                               O           ad - bc                                                             O  Yc   =  ─────────                                                            O    ij     ad + bc                                                             O                                                                               O  where: a,b,c,d = frequency of matches or mis-matches in variables i and j:   O                                                                               O                      Var.j                                                    O                    Pres. Abse.                                                O                   ┌───────────                                                O       Var.i  Pres.│  a     b                                                  O              Abse.│  c     d                                                  OMore Coefficients Help Screen                                                  O                                                                               O  This option will take you to a second menu of coefficients containing        Oa number of distance coefficients.                                             O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OClustering Method Help Screen                                                  O                                                                               O  Seven different clustering methods are available.  These different methods   Oare based on the way in which the distances between newly fused groups and all Oother groups or objects is calculated.                                         O                                                                               O  The minimum variance method is restricted to using squared Euclidean distanceOmatrices as input, but all other methods may use any distance or similarity    Omatrix as input.  However, the user should see works such as Greig-Smith (1983)Owhich discuss the properties of various combinations of distance measures and  Oclustering methods.                                                            O                                                                               O                                                                               OTree Description File Help Screen                                              O                                                                               O  You may have a description of the completed dendrogram output to a file,     Owhere it can be used to plot a dendrogram using the PLOTGRAM program.  This    Odescription is composed of nested parentheses and commas that delineate the    Ogroups that are fused together in the cluster diagram, and ':' followed by     Onumbers that indicate the length of a branch.                                  O                                                                               O  PLOTGRAM is no longer distributed with MVSP, but a copy may be obtained from OKovach Computing Services for £5 to cover disk, postage, and handling.         O                                                                               O                                                                               O                                                                               OTree Order File Help Screen                                                    O                                                                               O  You may have the order of the objects in the dendrogram output to a file.    OThis file can be used as input for the SORTDATA program, which prints out the  Othe data matrix in graphic form, sorted in dendrogram order.  The file can     Oalso be used as the basis for a translation table for the PLOTGRAM program,    Oallowing names longer than the 10 character limit for MVSP to be plotted.      O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               ORandomize Input Order Help Screen                                              O                                                                               O  Normally, the clustering procedure scans through the data matrix sequentiallyOto find the most similar objects, and fuses the first two most similar objects Ofound.  If, however, a number of objects are of equal similarity, a different  Odendrogram can be produced by fusing other objects of equal similarity first.  OThis option allows you to randomize the input order, so that other possible    Odendrograms can be generated.                                                  O                                                                               O  Note that the order of objects in the dendrogram can be changed without      Ochanging the actual hierarchy of clusters.  When comparing dendrograms, make   Osure to focus on the branching order, NOT on the order of the object labels.   O                                                                               OConstrained Clustering Help Screen                                             O                                                                               O  In constrained clustering, only objects which are next to each other in the  Odata matrix are considered for fusion, so that the order of objects in the     Ofinal dendrogram is the same as the order in the data matrix.                  O                                                                               O  This is particularly useful when the original order of the objects is        Osignificant, such as with stratigraphic geological data.                       O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OUnweighted Pair Group (UPGMA)                                                  O                                                                               O  In this average linkage clustering method, the distance between two groups isOdefined as the average of all distances between an object in one group and one Oin the other.                                                                  O                                                                               O  This measure is considered unweighted because each object in the cluster is  Ogiven equal weight when the average is calculated, whereas weighted clustering Oplaces equal emphasis on each group, regardless of the number of objects in theOgroup.  The unweighted method is generally considered better except under      Ocertain circumstances (see Weighted Pair Group help screen).                   O                                                                               O                                                                               OUnweighted Centroid                                                            O                                                                               O  In this average linkage clustering method, the distance between two groups isOdefined as the distance between the centroids of the two groups.  This has the Odisadvantage that reversals in the dendrogram can form, in which two objects   Othat are clustered can be more distant from each other than their centroid is  Ofrom another object.                                                           O                                                                               O  This measure is considered unweighted because each object in the cluster is  Ogiven equal weight when the average is calculated, whereas weighted clustering Oplaces equal emphasis on each group, regardless of the number of objects in theOgroup.                                                                         O                                                                               OWeighted Pair Group (WPGMA)                                                    O                                                                               O  In this average linkage clustering method, the distance between two groups isOdefined as the average of all distances between an object in one group and one Oin the other.                                                                  O                                                                               O  This measure is considered weighted because each cluster is weighted by the  Onumber of objects in the group, so that each group has equal weight, rather    Oeach object.  This is useful in cases where one group with many objects may    Odominate groups with fewer objects when unweighted methods are used.           O                                                                               O                                                                               O                                                                               OWeighted Centroid (Median)                                                     O                                                                               O  In this average linkage clustering method, the distance between two groups isOdefined as the distance between the centroids of the two groups.  This has the Odisadvantage that reversals in the dendrogram can form, in which two objects   Othat are clustered can be more distant from each other than their centroid is  Ofrom another object.                                                           O                                                                               O  This measure is considered weighted because each cluster is weighted by the  Onumber of objects in the group, so that each group has equal weight, rather    Oeach object.  This is useful in cases where one group with many objects may    Odominate groups with fewer objects when unweighted methods are used.           O                                                                               OMinimum Variance                                                               O                                                                               O  This clustering method uses a measure of within-group dispersion for each    Ocluster.  This is the sum-of-squares of the distance from each point to the    Ocentroid of the cluster.                                                       O                                                                               O  During clustering, the next two objects or groups to be fused are chosen so  Othat the within-group dispersion increases by the least amount.                O                                                                               O  Unlike other clustering methods, this one is restricted to using squared     OEuclidean distance as the input matrix.  Any attempt to use another type of    Odistance or similarity measure will generate a warning.                        O                                                                               ONearest Neighbor                                                               O                                                                               O  In this clustering method, the distance between two groups is taken to be theOdistance between the two points, one from each group, which are closest.  Thus Othe 'nearest neighbors' from each group represent the whole group.             O                                                                               O  This method has a tendency towards 'chaining', in which single objects are   Ocontinually added to on large cluster, forming a straggling staircase-like     Odendrogram.                                                                    O                                                                               O                                                                               O                                                                               O                                                                               OFarthest Neighbor                                                              O                                                                               O  In this clustering method, the distance between two groups is taken to be theOdistance between the two points, one from each group, which are farthest apart.OThus the 'farthest neighbors' from each group represent the whole group.       O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OLog Base Help Screen                                                           O                                                                               O  Logarithms are used in the calculation of evenness and most of the diversity Oindices.  You may choose which base of logarithms to use.  The logarithm will  Oaffect the size of the diversity unit, so the logarithm used should be         Oexplicitly stated in any publication.                                          O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               ODiversity Index Help Screen                                                    O                                                                               O  MVSP can calculate three different types of diversity indices.  These are    OSimpson's, Shannon's, and Brillouin's.  See the help screens for each index    Ofor the equations for these indices.                                           O                                                                               O  Besides the diversity index, the number of species in each sample and the    Oevenness will also be calculated.  Evenness is defined as:                     O                                                                               O   E = H / log(n)                                                              O                                                                               O  where: H = diversity index                                                   O         n  = number of species in sample                                      OSimpson                                                                        O                                                                               O              1                                                                O  H = 1 -  ────────  Σ  n (n - 1)                                              O           N(N - 1)   j  j  j                                                  O                                                                               O  where: N = total number of individuals in sample                             O         n = number of individuals of the jth species                          O          j                                                                    O                                                                               O                                                                               O                                                                               O                                                                               OShannon                                                                        O                                                                               O          ┌  n       ┌ n  ┐┐                                                   O          │   j      │  j ││                                                   O  H = - Σ │ ───  log │─── ││                                                   O         j└  N       └ N  ┘┘                                                   O                                                                               O  where: N = total number of individuals in sample                             O         n = number of individuals of the jth species                          O          j                                                                    O                                                                               O                                                                               O                                                                               OBrillouin                                                                      O                                                                               O                                                                               O  H = log N! - Σ  log n !                                                      O                j      j                                                       O                                                                               O  where: N = total number of individuals in sample                             O         n = number of individuals of the jth species                          O          j                                                                    O                                                                               O                                                                               O  This index is appropriate if the data represent the whole of a finite        Opopulation, rather than a random sample from an indefinitely large population. OScreen Colors Configuration Help Screen                                        O                                                                               O  This option allows you to change the colors of six parts of the screen       Odisplay, including: regular text, regular background, menu text, menu          Obackground, menu frame, and error messages                                     O                                                                               O  When one of the six parts of the screen display is chosen, you are then      Opresented with a menu of the 16 colors which can be displayed on the Color     OGraphics Adapter (8 colors for backgrounds).  You may try different color      Ocombinations until you find one you like.  An option is provided to reset      Othe colors to black and white.                                                 O                                                                               O                                                                               ODefault Data File and Work File Path Help Screen                               O                                                                               O  This option allows you to specify the disk drive and directory in which your Odata files will reside.  When prompted, you may enter either a disk drive      Odesignation (i.e. "B:") or a valid DOS pathname (i.e. "C:\MVSP\DATA").  The    Oprogram will then look in that directory or disk for the data files and will   Owrite all output files there.  This default may be overridden by entering the  Ofull pathname of a file when the program requests a filename.                  O                                                                               O  You will also be asked for a disk drive for storage of temporary work files  Owhich are created if the data do not all fit in memory.  A hard disk will be   Omuch faster than a floppy.  If your machine has memory greater than 640K, set  Othe extra up as a RAMdisk and use that for the work files.                     ODefault Data File Extension Help Screen                                        O                                                                               O  This option allows you to specify different filename extensions for differentOtypes of input and output files.  These extensions will be assumed if you don'tOinclude an extension when entering a filename.  These defaults will be         Ooverridden if you specify another extension with the filename.                 O                                                                               O  Six different extensions may be entered for the following file types:        O    Raw data files (rectangular matrices)                                      O    Symmetric matrix data files (input to PCO and cluster analysis)            O    Regular output files (results of analyses)                                 O    PCO and cluster analysis output files                                      O    Tree description and tree order output files                               OOutput Format Help Screen                                                      O                                                                               O  This option allows you to change default settings for a number of aspects    Oof the program output.  These aspects include:                                 O                                                                               O  Width of printed page                                                        O  Width of output and data columns                                             O  Number of decimal places for output and data numbers                         O  Screen output method                                                         O                                                                               O                                                                               O                                                                               O                                                                               OGraphics Default Help Screen                                                   O                                                                               O  This option will allow you to change a number of defaults relating to the    Oformat of the plots produced by the PCA, PCO, CA, and clustering procedures.   OThese defaults include the type of plot (produced with text characters or      Odrawn in graphics mode), the width of the text plots, the number of plots per  Opage of paper, and the manner in which to label the data points.               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OPrinter Setup Help Screen                                                      O                                                                               O  This option will allow you to specify what type of printer you are using     Ofor output of results and graphics.  You can also set various options such     Oas printer resolution, paper size, and plot size.  Different printers can      Obe specified for text and graphics output.                                     O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OReread Configuration File Help Screen                                          O                                                                               O  This option will reread the configuration file MVSP.CNF and reinstate all    Odefault options as specified in the file.                                      O                                                                               O  This is useful for when you are experimenting with different default options Oand wish to return to the original settings.  If you have saved the options    Oduring experimentation, however, it will reinstate the options as specified    Oat the time of the save.                                                       O                                                                               O                                                                               O                                                                               O                                                                               OText Color                                                                     O                                                                               O  This is the color which will be used for most of the display text, including Oanalysis results and status messages.                                          O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OSpecial Text Color                                                             O                                                                               O  This is the color which will be used for special display text, including     Oerror messages and help screens.                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OBackground Color                                                               O                                                                               O  This is the color which will be used as the background for most of the normalOdisplay text.                                                                  O                                                                               O  Background colors are restricted to the eight low intensity colors, while    Otext can be displayed in sixteen colors, low or high intensity.                O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OMenu Text Color                                                                O                                                                               O  This color is used for the main text in the menu windows.                    O                                                                               O  The cursor bar of the menus is created by reversing the text and background  Ocolors of the menu, so that the text is the background color and the bar is    Oa low intensity version of the text color.  This reversing process can create  Osome unusual and unreadable results, so care must be taken in choosing the     Omenu colors.  Option F may be used to reset black and white colors if your     Onew color combination is unreadable.                                           O                                                                               O                                                                               O                                                                               OMenu Background Color                                                          O                                                                               O  This color is used for the background of the menu windows.                   O                                                                               O  The cursor bar of the menus is created by reversing the text and background  Ocolors of the menu, so that the text is the background color and the bar is    Oa low intensity version of the text color.  This reversing process can create  Osome unusual and unreadable results, so care must be taken in choosing the     Omenu colors.  Option F may be used to reset black and white colors if your     Onew color combination is unreadable.                                           O                                                                               O                                                                               O                                                                               OMenu Frame Color                                                               O                                                                               O  This color is used to draw the frame around the menus.  The background       Oof the frame will be in the background color of the main text.                 O                                                                               O  The menu title which is embedded in the frame will be in the menu text color Orather than the menu frame color.                                              O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OReset Black And White                                                          O                                                                               O  Choosing this option will reset all colors to black and white.               O                                                                               O  Remember, if any color combinations become so unreadable that you can't      Oread the menu, typing "F" will let you start again.                            O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               ORaw Input File Default Extension Help Screen                                   O                                                                               O  This option allows you to specify the default extension for the raw data     Omatrix files used as input for the PCA, CA, similarity/distance, and           Odiversity index procedures.                                                    O                                                                               O  These should be rectangular matrices, not square symmetrical, and the file   Oheader should specify the number of both rows and columns.                     O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OPCO & Cluster Analysis Input File Default Extension Help Screen                O                                                                               O  The input files for PCO and cluster analysis, which must be square symmetric Omatrices, may be given different extensions to distinguish them from           Orectangular data matrix files.  The PCO and cluster analysis procedures will   Oassume this extension unless another one is specified by the user.             O                                                                               O  The similarities/distances procedure can output a symmetric matrix           Oto a file in a format ready to be read by the PCO and cluster analysis         Oprocedures.  The default extension you choose with this configuration option   Owill be added to the original filename to produce a new filename               Oautomatically, unless you specify another name for the symmetric matrix file.  O                                                                               ORegular Output File Default Extension Help Screen                              O                                                                               O  This option allows you to specify a default extension to be used for output  Ofiles.  If you choose to have output placed into a disk file, the output file  Owill by default be given the same name as the input file, but with a different Oextension; the one you specify here.                                           O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OPCO & Cluster Analysis Output File Default Extension Help Screen               O                                                                               O  The output for the PCO and cluster analysis procedures may be given a        Oseparate default extension to avoid overwriting the output file of the         Osimilarities/distances procedure, if it was run before the PCO or              Ocluster analysis.                                                              O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OTree Description Output File Default Extension Help Screen                     O                                                                               O  This is the default extension for the file which will contain the descriptionOof the dendrogram produced by the cluster analysis procedure.  This extension  Owill automatically be added to the original input file name to produce a new   Ofilename, unless you type in another name.                                     O                                                                               O  Note that the PLOTGRAM program, which reads these description files, assumes Oan extension of .PLG unless another one is specified.                          O                                                                               O                                                                               O                                                                               O                                                                               OTree Order Output File Default Extension Help Screen                           O                                                                               O  This is the default extension for the file which will contain the order of   Oobjects in the dendrogram produced by the cluster analysis procedure.  This    Oextension will automatically be added to the original input file name to       Oproduce a new filename, unless you type in another name.                       O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OPage Width Help Screen                                                         O                                                                               O  This option allows you to set the default page width of printed output.      ONormally, this would be 80 columns, but if you are using a printer with a wide Ocarriage and wide paper, or if you have a dot matrix or laser printer which canObe set to print in compressed mode, you can set the width to 130 columns.      O                                                                               O  The "Text Style" option of the "Printer Setup" menu allows you to specify theOuse of compressed of tiny printing on your printer.                            O                                                                               O                                                                               O                                                                               O                                                                               OResults Column Width Help Screen                                               O                                                                               O  This option allows you to set the default column width for printed output.   OAll numbers and labels on the printout will be limited to this width.  If a    Onumber to be output has more digits than the default column width, the whole   Onumber is output, and adjacent numbers will be shifted over.  Therefore,       Obe sure to use a column width wide enough to accommodate your data and expectedOresults.                                                                       O                                                                               O  With numbers, this column width is for the entire number, including the      Odecimal point, decimal fraction, and the space between numbers.  Thus          O" 2345.67" requires a column width of at least 8 spaces.                       O                                                                               OResults Decimal Place Help Screen                                              O                                                                               O  This option allows you to set the number of decimal places to display for    Othe results.  All numbers will be rounded to this number of decimal places.    O                                                                               O  This setting is also used by the distances/similarities procedure when       Owriting values to the symmetric matrix output file, and thus the accuracy      Oof numbers input to the cluster analysis program will be limited by this       Ooption.  I would suggest using at least three decimal places in most           Osituations.                                                                    O                                                                               O                                                                               O                                                                               OData Column Width Help Screen                                                  O                                                                               O  This option allows you to set the default column width for printed output of Othe original data and in the data editor.  All numbers and labels on the       Oprintout will be limited to this width.  If a number to be output has more     Odigits than the default column width, the whole number is output, and adjacent Onumbers will be shifted over.  Therefore, be sure to use a column width wide   Oenough to accommodate your data.                                               O                                                                               O  With numbers, this column width is for the entire number, including the      Odecimal point, decimal fraction, and the space between numbers.  Thus          O" 2345.67" requires a column width of at least 8 spaces.                       O                                                                               OData Decimal Place Help Screen                                                 O                                                                               O  This option allows you to set the number of decimal places to display for    Othe original data.  All numbers will be rounded to this number of decimal      Oplaces in the printed output, the full-screen editing of data, and the output  Ofiles for the data conversion routines.                                        O                                                                               O  If you are only working with whole numbers, then you may set this value to 0.ORemember, however, that if you create a new file of log transformed or         Opercentage data, that these will also be rounded to whole numbers, which would Onot be appropriate.                                                            O                                                                               O  This value does not affect the accuracy of data once they have been read.    OScreen Output Method Help Screen                                               O                                                                               O  This option lets you toggle between two methods of screen output, direct     Oscreen memory output and BIOS output.  The direct memory method writes data    Odirectly to the area of memory which controls the screen, while the BIOS       Omethod uses calls to your computer's BIOS (basic input/output system).         O                                                                               O  The direct output method is much faster, but only works on computers which   Oare hardware-compatible with the IBM-PC (almost all IBM compatibles sold these Odays are hardware-compatible).  Direct output also may cause problems when     Oused under windowing, multitasking environments such as Microsoft's "Windows". OIf you are using one of these environments, then choosing BIOS output should   Oallow MVSP to run correctly.                                                   OCheck Video "Snow" Help Screen                                                 O                                                                               O  On some brands of color graphics adapter boards (most notably IBM's          Ooriginal), the fast method of writing directly to the screen memory can cause  Ointerference, or "snow", on the screen.  This occurs when both the program and Othe computer's operating system try to work on the screen memory at the same   Otime.                                                                          O                                                                               O  This option forces the program to check the screen memory before writing to  Oit to make sure there will be no interference.  This eliminates snow, but also Oslows down the output somewhat.  If your graphics adapter is not susceptible   Oto snow, then this option should be set to "No" for optimal speed.  If snow    Oappears, then set the option to "Yes".                                         OScatterplot/Dendrogram Type Help Screen                                        O                                                                               O  MVSP can produce plots in two ways, in graphics mode where the plot is drawn Oon the screen using lines and dots, or in text mode where the graph is made    Oup of characters such as '|' and '-'.  Text mode scatterplots are less         Oprecise, since the placement of the points is limited to a grid of 70x22 or    O110x55 characters.  Graphics mode plots can only be printed on the supported   Ographics mode printers listed in the Printer Setup menu, or other printers     Osupported by the DOS GRAPHICS screen dump facility.                            O                                                                               O  Graphics mode plots can only be drawn on computers with graphics adapters    O(CGA, EGA, VGA, VESA Super-VGA, or Hercules).  If you have a monochrome adapterO(MDA), the plots will automatically be drawn in text mode.                     OWide Text Plots Help Screen                                                    O                                                                               O  You may choose to have the text mode graphs plotted so that they fit an 80   Ocolumn screen and piece of paper, or you can have wide graphs printed out.     OThe wide plots are 120 columns wide and 60 rows long, so that they must either Obe printed on a wide carriage printer, or your printer must be set to print in Ocompressed mode.  These wide plots are more accurate than the 80 column plots, Osince more columns and rows are being plotted per graph.                       O                                                                               O  If you use the tiny print mode (compressed superscript with 12 lines per     Oinch), then two graphs can be plotted per page; otherwise set the Plots Per    OPage option to 1.                                                              O                                                                               OPlots Per Page Help Screen                                                     O                                                                               O  This allows you to specify how many plots to draw before the program issues  Oa form feed command to your printer to advance to the next page.  With text    Omode plots you will normally be able to fit two plots per page.  If you are    Ousing wide text plots and compressed or 'tiny' print you may need to           Oexperiment to find the correct value.                                          O                                                                               O  Plots printed in graphics mode on the supported printers will fill an entire Opage, so this value should be set to 1.  Most implementations of the DOS       OGRAPHICS program, which allows graphics on the screen to be printer with the   OPrtScr key, also fit one screen-dump per page.                                 O                                                                               OData Labels Type Help Screen                                                   O                                                                               O  There are two ways in which MVSP can plot data points.  The first is to plot Oeach point using a sequential letter or symbol which corresponds to the symbolsOindicated for each row of the results output.  This makes it easy to determine Owhich point goes with which object.  You may also choose to have the first     Oletter or symbol of the data labels in your data file plotted.  If the objects Oyou are analyzing can be grouped, you can give different letters or symbols to Oeach group, so that you can see trends in the distribution of these groups.    O                                                                               O  You should avoid using numbers as the first symbols of your labels, as the   Otext graphs use numbers to indicate the number of data points which are        Oplotted in the same space.                                                     O400 Line Graphics Mode Help Screen                                             O                                                                               O  Some computers, like the AT&T 6300 and the Compaq Portables III and 386,     Oprovide a special high resolution 640 x 400 graphics mode in addition to the   Onormal 640 x 200 high resolution mode of the Color Graphics Adapter (CGA).     O                                                                               O  MVSP uses the special graphics features of the Borland Turbo Pascal compiler Oto automatically detect the type of graphics hardware in a computer and to     Oadjust the graphics output accordingly.  However, it is not able to detect     Ocomputers which utilizes the special 400 line graphics mode; it will think theyOare normal CGA computers.  If your computer is capable of generating a 400 lineOgraphics mode, then set this option to 'Yes' to take advantage of that higher  Oresolution                                                                     OPlots Per Analysis Help Screen                                                 O                                                                               O  This allows you to specify how many axes to plot for each analysis in the    OPCA, PCO, and CA procedures.  If, for instance, you choose 3, the first three  Oaxes will be plotted against each other in all possible combinations (1 x 2,   O1 x 3, 2 x 3).  Entering -1 will cause the program to allow you to specify     Othe number of axes to plot at runtime, after the eigenanalysis, so that you canOview the results before deciding.                                              O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OPrint Graphics Automatically Help Screen                                       O                                                                               O  If you are using graphics mode plots, choosing this option causes the plots  Oto be printed automatically after they are drawn on the screen.                O                                                                               O  If this option is set to "No" you can still print the plot while it          Ois on the screen by pressing the "P" key.                                      O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OFont Help Screen                                                               O                                                                               O  This option allows you to choose which font to use for drawing               Oscatterplots and dendrograms.  The appearance of these fonts on different      Oscreens and printers will vary, so you may need to experiment to find the      Obest font.                                                                     O                                                                               O  If you are printing graphs to a file to import into other programs (perhaps  Oas HPGL plotter files) you may need to use one of the single-stroke fonts,     Osuch as Default or Simplex, for best results.  WordPerfect in particular       Ohas problems with the Sans Serif and Complex fonts.                            O                                                                               O                                                                               OPrint Centered Similarity Matrix Help Screen                                   O                                                                               O  Before eigenanalysis, the input matrix is centered by subtracting the row    Oand column means and adding the grand mean to all data points.  Distance       Omatrices are first converted to similarities by multiplying the square of      Oeach value by -0.5.                                                            O                                                                               O  You may choose to have this new centered matrix printed out before           Oeigenanalysis so that you can see the results of these transformations.        O                                                                               O                                                                               O                                                                               O                                                                               OAll Eigenvalues Help Screen                                                    O                                                                               O  When this option is chosen, all resulting eigenvalues and associated         Oeigenvectors and scores will be printed out.  There will be as many eigenvaluesOand eigenvectors as there are rows in the data matrix.                         O                                                                               O  It is often useful in PCA to examine the last eigenvectors.  Outlying or     Ounusual variables will often have high loadings on either the first few        Oeigenvectors (those with the highest eigenvalues) or the last few.  Those whichOappear on the last few eigenvectors will usually be outliers in respect to     Otheir correlation with other variables, and therefore will not be obviously    Odifferent in the original data matrix.                                         O                                                                               OKaiser's Rule Help Screen                                                      O                                                                               O  When this option is chosen, only those eigenvalues (and associated           Oeigenvectors) which are greater than the mean of all eigenvalues will be       Oprinted out.  When a correlation matrix is used, all eigenvalues greater than  O1.0 are printed.                                                               O                                                                               O  Note that choosing this rule is the equivalent of entering '-1' for the      Ominimum eigenvalue in MVSP ver. 1.31.                                          O                                                                               O                                                                               O                                                                               O                                                                               OJolliffe's Rule Help Screen                                                    O                                                                               O  This is a modification of Kaiser's rule.  The minimum eigenvalue is taken to Obe the mean eigenvalue multiplied by 0.7 (or simply 0.7 when the correlation   Omatrix is used).  This gives a slightly lower minimum eigenvalue and usually   Oresults in one or more extra eigenvalues and vectors being printed.            O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OUser Supplied Minimum Eigenvalue Help Screen                                   O                                                                               O  This option gives you the flexibility of specifying the exact value for the  Ominimum eigenvalue.                                                            O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OEnter/Edit Data Help Screen                                                    O                                                                               O  MVSP contains a spreadsheet-like data editor which allows you to enter your  Odata directly into an MVSP file in the proper format.  You may edit an existingOfile or create a new one, and you may insert existing data into the new file   Oso that modifications are saved under the new name.                            O                                                                               O  All changes and additions are saved by pressing the F9 or F10 keys.  A backupOfile with the previous version of the file will be created, with the extension O".BAK".                                                                        O                                                                               O  Pressing F1 while in the data editor will give a help screen explaining otherOkeystrokes.                                                                    OTransform Data File Help Screen                                                O                                                                               O  You may choose to have your data transformed and saved to a new file.  This  Ooption allows you to choose square root, log (base 2, 10, or e) or logratio    Otransformation.                                                                O                                                                               O  The log transformations are performed on the values of (X + 1) to avoid      Ocomputer errors when the datum is 0, as the log of 0 is undefined, and to      Oavoid negative results when the datum is < 1.  The square root                 Otransformation is performed on the original datum.                             O                                                                               O  The centered logratio transformation replaces data with the log of the ratio Obetween the data value and the geometric mean of the sample (column).          OTranspose Data File Help Screen                                                O                                                                               O  This option transposes the data matrix and saves it to a new file.  Normally,Oyou would have the data file set up with the objects of interest as the columnsOand the characters or variables defining those objects as rows.  Thus, in an   Oecological study, the samples would be columns and the taxa rows. In a         Otaxonomic study, the taxa would be columns and the characters rows.            O                                                                               O  This option allows you to "flip" the data matrix so that the rows of the     Omatrix are considered the objects of interest.                                 O                                                                               O                                                                               O                                                                               OConvert Data Help Screen                                                       O                                                                               O  This option allows you to convert your data to a number of different scales. OThe possible scales currently include percentage (0-100), proportions (0-1.0), Obinary (0,1), octave, range-through and standardized.  The octave scale is a 10Opoint abundance class scale which is logarithmically-based.  With ecological   Odata, this scale smooths over minor variation that may only reflect "noise",   Othus allowing the major trends to be studied more easily.  The range through   Oscale is used by biostratigraphers and assumes that a taxon is present in everyOsample (column) between the first and last stratigraphic occurrence.           O                                                                               O  Percentages, proportions and octave are calculated column-wise, while        Ostandardization and range-through are calculated row-wise.                     ODrop Rows or Columns Help Screen                                               O                                                                               O  This option allows you to create a new file containing a subset of the       Ooriginal data.  You will be presented with lists of the row and column labels. OYou may then move among them using the cursor keys and select rows or columns  Oto be dropped by pressing the space bar.  This will cause the label to be      Odisplayed in reverse highlight, indicating that it has been selected for       Odeletion.  Pressing the space bar again will turn off the "selection".         O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               ODrop 'Zero' Help Screen                                                        O                                                                               O  This option allows you to remove all rows and columns that have totals of    Ozero.  Zero totals will have adverse effects on a number of the analyses, and  Osome will not run if either the rows or columns have all zeros.                O                                                                               O  It is particularly useful to use this option when you are creating a new     Omatrix by dropping rows or columns.  For instance, if a column only has two    Onon-zero entries and you drop both those rows from the data matrix, you will   Obe left with a zero column total.  If you also choose the Drop Zero option,    OMVSP will drop this column.                                                    O                                                                               O                                                                               OImport/Export Type Help Screen                                                 O                                                                               O  You may import and export data in a number of formats.  CEP format is        Othe condensed data file type used in the Cornell Ecology Programs such as      OTwinspan and Decorana, as well as Canoco.  Lotus Worksheets are spreadsheets   Oin the Lotus 1-2-3 or Symphony format, with the extensions .WKS, .WK1, or .WK2.O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OText Printer Help Screen                                                       O                                                                               O  This option allows you to choose what type of printer should be used for     Oprinting results of analyses.  MVSP is set up to work with Epson, Hewlett      OPackard, and Postscript printers.  You may also define codes for setting up    Oa printer that is not compatible with one of these.  If you do not wish to     Ouse any special text styles or fonts, the plain ASCII type will just send      Oplain text to the printer.                                                     O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OText Style Help Screen                                                         O                                                                               O  This option allows you to choose special text enhancements for output of     Othe results.  By default normal text is used.  You may also choose to have     Oresults output in a compressed font that allows 130 columns per 8.5x11 inch    Oor A4 page, instead of 80.  The tiny print style is not only compressed but    Oalso uses letters that are half the height of normal, so that twice as many    Olines can fit on a page.  This is very useful for saving paper as well as      Oallowing you to see more at a glance.                                          O                                                                               O                                                                               O                                                                               O                                                                               OPaper Size Help Screen                                                         O                                                                               O  This option allows you to choose the paper size used for text output.        OIt may be set at Letter (8.5x11 inch), Legal (8.5x14 inch) or A4 (8.27x        O11.69 inch).  If you are using wide carriage paper, choose the paper           Otype that is of the same length.                                               O                                                                               O  Note that the paper size for graphics output is selected separately          Ousing the Graphics Mode option.                                                O                                                                               O                                                                               O                                                                               O                                                                               OGraphics Printer Help Screen                                                   O                                                                               O  This allows you to specify the printer type used for printing the graphs     Oand dendrograms.  You may have the graphics printed on the same printer        Oas the results or on a different, higher quality one.                          O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OGraphics Mode Help Screen                                                      O                                                                               O  Most graphics printers allow a variety of resolutions and paper sizes to     Obe specified.  Higher resolution will give better results but, in some cases,  Omay take much longer to print.                                                 O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OGraphics Output Device Help Screen                                             O                                                                               O  You may specify the port to which your graphics printer is attached.  The    OLPT1 parallel port is the default but you may also use the second parallel     Oport or one of the serial ports.  You may also send the graphs to a file.      OThey may then be printed later or on another computer, using the DOS command   O'COPY /B filename PRN' (note that the '/B' is necessary).                      O                                                                               O  Note that some graphics programs allow HP Plotter files to be imported for   Ofurther manipulation.  If you have a program with this capability you can      Ochoose the HP Plotter as the graphics printer and then send the results to a   Ofile.  You may also save the results to a file as a bitmap for further         Omanipulation, but the resolution will be limited to 640x480.                   OExecute DOS Commands Help Screen                                               O                                                                               O  This allows you to temporarily exit to DOS to run some other command or      Oprogram.  MVSP will be kept in memory and your settings will remain intact.    OYou can return to MVSP by typing the DOS command "exit".                       O                                                                               O  While in DOS, be careful that you do not execute any programs that will      Oremain in memory, such as memory resident "pop-up" utilities.  These will      Ocause problems when you return to MVSP and may cause your computer to lock up. O                                                                               O                                                                               O                                                                               O                                                                               OSave Results to WKS Help Screen                                                O                                                                               O  This option allows you to save the results of an ordination to a Lotus 1-2-3 Ospreadsheet file.  You can then analyse the results further or graph them in   Oa spreadsheet or other graphics or statistics program that can import Lotus    Ofiles.                                                                         O                                                                               O  The results are saved in three blocks: first the eigenvalues and percentages,Onext the eigenvectors, and finally (except in PCO) the component scores.  If   Oyou wish to import only one of these blocks to another program you may need to Oedit the file to remove unwanted rows.  Some programs also allow you to specifyOthe range of the block of data to import.                                      O                                                                               OPlot Width Help Screen                                                         O                                                                               O  This allows you to scale the scattergram or dendrogram to whatever size you  Owish.  The value you enter is the width of the plot in centimeters across the  Opage in portrait orientation.  Scattergrams are turned sideways on the page so Othe value you enter will specify the smaller of the two dimensions of the plot.O                                                                               O  The plot will be centered on the page.                                       O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               OPlot Height Help Screen                                                        O                                                                               O  This allows you to scale the scattergram or dendrogram to whatever size you  Owish.  The value you enter is the height of the plot in centimeters across the Opage in portrait orientation.  Scattergrams are turned sideways on the page so Othe value you enter will specify the larger of the two dimensions of the plot. O                                                                               O  The plot will be centered on the page.                                       O                                                                               O                                                                               O                                                                               O                                                                               O                                                                               